Rub 'n Buff is a DIY favorite for good reason. This wax-based metallic finish can transform dull, dated pieces into elegant, high-end-looking decor. You can easily add a luxe touch with Rub 'n Buff. It’s perfect for revamping old furniture, updating frames, or highlighting decorative items. The popular copper Rub 'n Buff gives a warm, vintage feel.

But here’s the catch: Rub 'n Buff isn’t like regular paint. If not sealed properly, it can wear off over time. If you want to know what clear coat works with Rub and Buff paint, this guide has all the details you need.

Why Rub 'n Buff Needs a Clear Coat

The element used to make Rub n Buff is a mixture of powders and waxes of metals. It dries soft as opposed to acrylic or oil-based paints. It takes the form of a semi-hard waxy coating. Although this looks beautiful, it can smudge or can easily get scratched.

If you are working on a high-touch item like drawer handles, picture frames, or wooden trim, don’t seal it. A clear coat will resist daily wear and tear. It also adds lasting color and shine to your piece.

How to Seal Rub n Buff the Right Way

1. Let It Cure

Cure Rub n buff at least 24 hours before sealing. This makes certain that the wax is completely dry and will not be smeared when you put on the topcoat.

2. Buff Lightly

Clean the surface with a soft and clean cloth. This removes any excess product that is left on the surface and assists you in getting that deep metallic finish of which Rub n Buff is known.

3. Choose the Right Sealer

The main error the people commit? A clear coat of water-based. Rub 'n Buff being a wax-based product, water-based sealers will streak, dull, or be cloudy. Rather, use a spray sealer that is either solvent- or oil-based.

Best Clear Coats for Rub 'n Buff

Here are three top clear coats that work well with Rub 'n Buff—without ruining the finish.

1. Rust-Oleum Clear Enamel Spray (Oil-Based)

A reliable option for sealing wax based products. This enameled spray dries hard. It lasts a long time and protects the finish while keeping its metallic look.

• Apply in light, even coats

• Let each coat dry for 10–15 minutes

• Great for metal, wood, and ceramic

2. Krylon Crystal Clear Acrylic Coating

It’s a quick-drying, non-yellowing acrylic spray. You can apply it over Rub n Buff, but keep the metallic look.

• Hold the can 8–10 inches from the surface

• Spray in short bursts to avoid drips

• Ideal for decorative items and indoor pieces

3. Minwax Clear Aerosol (Non-Water-Based Only)

If you’re working with rub and buff on wood, Minwax makes a clear aerosol version that’s compatible with wax finishes. Avoid the brush-on version—it can pull up the wax.

• Comes in satin and gloss

• Works great on wood furniture

• Check the label to make sure it’s solvent-based

Using Rub and Buff on Wood

Yes, certainly, Rub and Buff works on wood, it goes on exceptionally well. It makes wood more textured and detailed, whether you are repairing antique trim or a wood jewelry box.

Here's how to do it:

1. Prep the surface: Lightly sand and clean the wood.

2. Apply Rub 'n Buff: Use your finger or a soft cloth. Move it in circles or follow the carved lines.

3. Let it dry: Wait 30–60 minutes.

4. Buff to shine: Use a dry cloth to bring out the shimmer.

5. Seal the surface: Once fully cured (after 24 hours), apply your chosen clear coat to protect the finish.

Pro Tip: If the wood is unfinished, consider applying a base stain first. This gives you more depth and contrast underneath the metallic layer.

Is Rub and Buff Waterproof?

A lot of DIYers ask, “Is Rub and Buff waterproof?” The answer is: not really.

It is not waterproof because it is a wax-based product, hence a bit water resistant. Being left unsealed, it is subject to humidity, splashes, or everyday cleaning. Sealing is important for bathroom decorations, kitchen utensils, and outdoor items.

Rub n Buff lasts longer with the right clear coat. It becomes waterproof, scratch-resistant, and fade-resistant.

Final Thoughts: What Clear Coat Can Go Over Rub and Buff Paint

No matter if your surface is wood, metal, ceramic, or copper Rub n Buff, here’s a quick tip: use a sealant. It will help your project last longer. It fixes the color, retains the metallic effect shiny and makes it not subject to wear and tear.

To recap:

• Let Rub 'n Buff cure for 24 hours before sealing

• Use a soft cloth to buff before topcoating

• Avoid water-based sealers

• Use a light, oil-based or acrylic spray clear coat

• Always test on a small spot first!

Once you know how to seal calcot Rub n Buff, then not only will your work look fantastic, but it should also last years.

At Jupiter Epoxy Flooring, we enhance every surface with beauty and durability. Our epoxy floors, perfect for garages and commercial spaces, are made to last. Trusted in Jupiter, FL, we transform concrete into custom, seamless designs. Enjoy quality finishes and expert craftsmanship that endure over time.

FAQs About Rub 'n Buff

How do you seal Rub n Buff on wood?

Let the Rub 'n Buff sit for at least 24 hours. Then, use a clear enamel spray or acrylic topcoat like Rust-Oleum Clear Enamel or Krylon Crystal Clear. Spray light coats to avoid disturbing the finish.

Can I use Rub and Buff on raw wood?

You can, but it’s best over painted or stained wood. Raw wood may absorb too much product, making the finish uneven. Prepping with a sealer or stain first helps the metallic finish sit on the surface more evenly.

Is copper Rub n Buff durable?

Yes, especially when sealed. Without sealing, it can wear off with handling. When protected with the right topcoat, it holds up well on frames, hardware, and wood accents.

Can Rub and Buff be used on outdoor items?

It’s not ideal for outdoor use unless sealed with a weather-resistant clear coat. Even then, prolonged exposure to rain or sun could eventually dull the shine.

Can I layer Rub 'n Buff colors?

Absolutely. Let the first layer dry, then apply a second shade. For example, layering silver over black creates a cool antique look. Seal once all layers are dry.